Set of cutters "Start"

A set of cutters for a beginner miller.
This set consists of high-quality inexpensive cutters that are used for finishing and roughing and are suitable for engraving thin inscriptions, patterns, flares, processing 3D reliefs, bas-reliefs, shapes, cutting along the contour, leveling the surface.
With this kit you can work on plastics, wood, plywood, fiberboard, MDF, plexiglass, acrylic, composite, plastic, veneer and soft non-ferrous metals.
The set is accompanied by a table of the ratio of material and type of cutter, a description of cutting conditions, general recommendations.
What cutters are included in this kit:
1. End spherical (radius) 4*4*22*45 (finishing and roughing)
2. End with a flat end 4 * 4 * 22 * 45 (roughing, trimming, cutting)
3. Conical spiral 4 * 0.75 * 20.5 * 50 (3d processing)
4. Type "corn" 3.175 * 2.5 * 10 * 38 (cutting such materials as: plywood, textolite, plastic, fiberglass)
5. End spherical (radius) 3.175 * 22 * 38 (finishing and roughing)
6. Single pass 3.175*17*38 (cutting, cutting, milling of various materials).
7. Engraver with a flat shelf 3.175*0.3*30* 60deg (for thin inscriptions and patterns, clichés, small 2D - 3D relief elements).
8. Engraver pyramid 3.175 * 0.3 * 33 * 45 degrees. (for processing 2D-3D small elements)
9. Type "corn" 3.175 * 0.8 * 6 * 38 (cutting such materials as: plywood, textolite, plastic, fiberglass)
Kit contents may change.