End grinding and polishing brush 180

Dimensions: 110*M14 Grit: 180 Cup brush made of abrasive nylon is used for grinding and soft brushing (texturing, structuring) of any wooden surfaces. The design is most optimal for processing vertical surfaces, walls made of logs, regular and laminated timber, round and flat. It fits well into wall joints. If you are not satisfied with the original condition of the wooden surface, there are small burrs and torn fibers, there is excessive roughness, but there are no large flaws or bark residues, then this brush is perfect for you. Application: Brushing / Light testing / Grinding Processed material: Wood Body shape: Cup Brush bristle material: Polymer abrasive (abrasive nylon) Mounting diameter B, G (mm): M14 Recommended operating speed of rotation of the brush 600-1800* rpm. You need to work with the tips of the pile without putting pressure on the tool. 4. Power tool used: angle grinder with speed controller (angle grinder, grinder); Polishing machine. * If you exceed the maximum operating speed, the wood will begin to burn and the ends of the polymer bristles will melt, as a result of which the brush will stop working. To resume efficient operation, trim the ends of the pile with scissors and continue working at normal speed of 600-1800 rpm.