CNC MILLING MACHINE WITH AUTOMATIC TOOL CHANGE

The milling machine is equipped with an automatic tool changer with a 6-position magazine located next to the spindle on a movable gantry, simplifying and speeding up the execution of complex designs that require processing with several cutters. The bed is fully welded, reinforced with additional stiffening ribs, which ensure optimal load distribution and processing accuracy throughout the life of the machine. Along the X, Y axes, the portal is moved along linear rail guides made of high-quality steel, with the help of a polished helical rail. Along the Z axis - ball-screw transmission.
Processing area (X,Y,) mm: 1600*2500
Travel along the Z axis, mm: 240
Workpiece fixation: Combined clamping (Vacuum + T-slot)
Vacuum pump: 5.5 kW oil-free (productivity 320 m3/h)
Working areas: 4
Table covering material: Veneer plywood 20 mm.
Feed mechanisms: polished helical rack - "X" and "Y" axis, ShVP 2005 - "Z" axis
Guides: square linear guides, accuracy class H, axis "X" and "Y" - HGR20, axis "Z" - HGR15
Max. movement speed (idle run) m/min: Up to 50
Working speed, m/min: up to 32
Location accuracy, mm: 0.05
Spindle: GDZ
Number of tools: 6
Spindle revolutions: 12,000 - 24,000
Collet type: ER 32
Tool holder: ISO 30
Max. cutter shank diameter, mm: 20
Drive of linear movements: Servomotor 750W
Software: NC Studio Weihong
Power supply, B: 380
Overall dimensions: 3400*1950*1500
Term of warranty service, month: 12
Design features:
Rack and pinion gear on the X and Y axes
Rack-and-pinion transmission on the X and Y axes: Movement occurs due to rack-and-pinion. Accuracy-Speed-Durability, the three main parameters by which it was decided to equip our machine with these rails.
Guidelines:
 Made in Taiwan
 Smooth movement, quiet operation
 Accuracy class H, standard size axis X, Y - 20, axis Z - 15
Ball screw pair for movement along the Z axis
 Direct drive (servo motor).
 High-precision nut with double oil ring, dust protection and lubrication.
Centralized oil system for guides and SHP, pneumatic spindle brush.
Vacuum table
Allows you to quickly and immovably install the workpiece on the work table due to the powerful vacuum station of 5.5 kW. This saves installation time. Also, the workpiece can be mechanically attached to the table with the help of clamps (ADDITIONAL FUNCTION: combined table). The desktop has four zones.
Electric spindle
 Electrospindle, made in China
 Air cooling.
 High level of reliability.
 Low noise level.
 Durability.
Servo motor
The electric drive is part of a synchronous complete drive developed by the company to control the feed movements of CNC machines that require a high degree of precision in position, speed or torque regulation.
― the ability to adjust speed, moment or position;
― position and speed feedback – encoder;
Replaceable cartridges
A magazine for 6-13 tools, an ISO30 chuck for a collet ER 32 (shank clamp) 3-20 will allow you to significantly reduce the operating time of processing and equip the machine with various tools necessary for any processing of your parts.
The rigid, all-metal bed has increased strength, contributes to the effective suppression of vibrations, as a result of which the highest quality of product processing is achieved. The absence of connecting elements in the frame significantly increases its rigidity and the entire machine. The large mass of the bed effectively suppresses all vibrations that occur during the operation of the machine.
The power elements of the machine are cast iron.
NC-Studio software
Lambda-CNC is a new series of controllers from Weihong. The Lambda system is designed to facilitate the design and installation process of the CNC system and improve the performance of the machine tool.