End grinding brush 240 with holder

Dimensions: 80*35*6 Grit: 240 An abrasive nylon brush is used for sanding and soft brushing (texturing, structuring) of any wooden surfaces. The design is most optimal for processing vertical surfaces, walls made of logs, regular and laminated timber, round and flat. It fits well into wall joints. If you are not satisfied with the original condition of the wooden surface, there are small burrs and torn fibers, there is excessive roughness, but there are no large flaws or bark residues, then this brush is perfect for you. Application: Brushing / Light testing / Sanding Recommended operating speed of brush rotation is 800-2500* rpm. You need to work with the tips of the pile without putting pressure on the tool. * If you exceed the maximum operating speed, the wood will begin to burn and the ends of the polymer bristles will melt, as a result of which the brush will stop working. To resume efficient operation, trim the ends of the pile with scissors and continue working at normal speed of 800-2500 rpm.